basic requirements:

When the goods arrive at the scene, we must first inspect the glass partition aluminum profiles. The glass partition aluminum profiles, color, quantity, thickness, aluminum profiles, white surface, scratches, bumps and other hard injuries. Look at the complete set of glass partition aluminum profiles are the same color, followed by inspection of the glass, now the glass partition glass is generally tempered glass, usually double glass tempered glass is 5MM, there are customers request 6MM, or 8MM. The minimum requirement for tempering of single glass partition is 8MM, which is mostly 10MM and 12MM.

Quality requirements:
1. When installing the glass partition, the partitioning of the upper frame surface should be left with a proper amount of gap to prevent damage to the glass during structural deformation (such as settlement).
2, the wall, cut off the skeleton of the mosaic glass, should be firmly connected to the structure.
3, the brick wall should be arranged evenly and neatly, the surface is flat.
4. The glass installed by the partition shall not be displaced, warped or loosened, and the joints shall be even, flat and compact.

Glass partition project acceptance criteria:
1. Check the wall and the ground with a spirit level, and whether the wall and the wall are horizontal and vertical.
2, the glass frame strip is firm, and the bond strength with the glass should be strong, the strength should comply with the relevant regulations.
3. Whether the height and size of the design are the same as those agreed in the design drawings.
4, the wall should be horizontal and straight, clean and tidy, the horizontal seam and the vertical seal width should be basically the same.
5. During the installation process, whether the glass partition aluminum profile and tempered glass have scratches and whether the fixing with the mounting point is stable.
6. Whether the glass partition is cleaned after installation, whether the door lock is installed properly, especially the parallelism between the door and the ground: if it is louvers. Check the button, whether the louver is flat, and how the light blocking effect is.

8, for the engineering aluminum profiles, glass, louvers, doors check whether there is a factory certificate.